3.4
Setting Draper Speed
NOTE:
The first time the Double Windrower Attachment (DWA) is
run up on the windrower, it is likely that the default speed
will be zero. This means the header may be engaged,
but the DWA deck may not be turning. Increase the
speed, and check that the deck has started to turn.
DWA draper speed can be controlled in three ways:
1.
Adjust draper speed by using the reel fore/aft buttons
on the GSL. Press the reel fore button (A) to increase
speed and the reel aft button (B) to decrease speed.
Figure 3.8: GSL
2.
Adjust draper speed from the operator’s console by
pressing button (A) to increase the speed or pressing
button (B) to decrease the speed.
Figure 3.9: Operator’s Console
3.
Speed can be controlled with the GSL buttons A, B, and
C. Refer to Section
2.6.1 Setting One-Touch-Return
.
Figure 3.10: GSL – Headland Management
214048
30
Revision A
Summary of Contents for DWA
