MacDon DWA, Operation And Parts Manual

Page: 31 / 98

ASSEMBLY/SETUP INSTRUCTIONS
4. Scroll to the One-Touch-Return icon (A), press the HPT
scroll knob (B) or the GSL select button (not shown) to
open the headland management menu list (B).
NOTE:
The F2 shortcut button on the operator’s console
also will open the One-Touch-Return menu
list (B).
Figure 2.29: One-Touch-Return Icon and
One-Touch-Return Menu List
To program the One-Touch-Return buttons, press and hold
button “A”, “B”, or “C” on the GSL handle for 3 seconds
until an audible tone is heard, indicating the current header
settings are saved to that button.
The One-Touch-Return buttons will always save header
height settings, but you can also save the following settings
for the DWA:
• DWA up/down
• DWA speed
Refer to your windrower operator’s manual for more
detailed One-Touch-Return information.
Figure 2.30: One-Touch-Return Buttons on the
GSL
2.6.2 Setting Draper Pressure Alarm
1. Press the scroll knob (A) on the Harvest Performance
Tracker (HPT) or the select button (B) on the ground
speed lever (GSL) while in any run screen to open the
QuickMenu system.
Figure 2.31: HPT Scroll Knob and GSL
Select Button
214048
23
Revision A