OTHER FUNCTIONS
12.3 CPU reset AT POWER ON
The function display may occasionally display
erroneous information (e.g. when fi rst applying
power). This may be caused externally by static
electricity or by other factors.
If this problem occurs, turn power OFF. After
waiting a few seconds, turn power ON again. If the
problem persists, perform the following procedure.
• Partial resetting is also available. See right for
details.
➥
While pushing
[MONI]
and
[D•CLR]
, push and hold
[PWR]
for
1 sec. to reset the CPU.
• “CLEAR” indicates, then
initial display appears.
12.4 Partial reset AT POWER ON
If you want to initialize the operating conditions
(VFO frequency, VFO settings, set mode contents)
without clearing the memory contents, a partial
resetting function is available for
the transceiver.
➥
While pushing
[D•CLR]
, push
and hold
[PWR]
for 1 sec. to
partially reset.
IMPORTANT!:
Resetting the transceiver CLEARS all memory
information and initializes all values in the
transceiver.
64
SECTION 12SECTION 12
Summary of Contents for MT-V82N
Page 1: ...User Manual VHF FM Transceiver...
Page 2: ......
