M-tech MT-V82N, User Manual

Page: 21 / 72

❹ DUPLEX INDICATOR (p.31)
Either “–” or “+” appears during repeater
operation.
❺ TONE INDICATOR
While in the analog (FM) mode operation
➥ “ ” appears while the subaudible tone
encoder is in use. (p.31)
➥ “ ” appears while the tone (CTCSS) squelch
function is in use. (p.50)
➥ “ ” appears while the tone (DTCS) squelch
function is in use. (p.50)
➥ “ ” appears with the “ ” or “ ” indicator while
the pocket beep function (CTCSS or DTCS) is
in use. (p.52)
❻ TRANSMIT INDICATOR (p.28)
Appears during transmit.
❼ FREQUENCY READOUT
Shows operating frequency, channel number
or channel names, depending on display type
(p.29).
❽ SIGNAL INDICATOR
➥ Shows receiving signal strength as below.
➥ Shows the output power level while
transmitting.
❾ BUSY INDICATOR
➥ Appears when a signal is being received or
the squelch is open.
➥ Blinks while the monitor function is activated.
(p.28)
❿ PAGER CALL INDICATOR
Blinks when a pager call is received.
CONTROL AND PANEL
Weak ⟸ RX Signal level ⟹ Strong
Low Middle High
19
SECTION 4SECTION 4