7.5 Repeater lockout (USING INITIAL SET MODE)
This function helps prevent interference to other
stations by inhibiting your transmission when a
signal is received. The transceiver has two inhibiting
conditions, repeater and busy.
①
While pushing and holding
[▲]
and
[▼]
, turn the
power ON to enter
INITIAL SET MODE
.
②
Push
[▲]
and
[▼]
several times until “RLO” appears.
③
Rotate
[VOL
] to select the repeater lockout
function to “RP,” “bU” or OFF.
• “RP”: Transmit is inhibited when a signal with
un-matched subaudible tone is received.
• “bU”: Transmit is inhibited when a signal is
received.
④
Push
[
✱
•ENT ]
(or
[D•CLR]
) to exit
INITIAL SET MODE
.
1750 Hz TONE
While pushing
[PTT]
, push
[▲]
or
[▼]
to transmit a 1750
Hz tone signal.
REPEATER OPERATION
Convenient
Tone scan function:
When you don’t know the subaudible
tone used for a repeater, the tone scan is
convenient for detecting the tone frequency.
Push
[A•FUNC]
, then push
[3•T.SCAN]
to start the
tone scan.
• Push
[D•CLR]
to cancel the scan.
• When the required tone frequency is
detected, the scan pauses.
34
SECTION 7SECTION 7
Summary of Contents for MT-V82N
Page 1: ...User Manual VHF FM Transceiver...
Page 2: ......
