M-tech MT-V82N, User Manual

Page: 41 / 72

Clearing a memory
① Push
[A•FUNC]
, then push
[C•MR]
to enter the memory transfer
mode.
• “
MR
” and a memory channel
number blink.
② Push
[▲]
or
[▼]
to select the
memory channel to be
cleared.
• When
[VOL]
is assigned as
tuning dial, rotate
[VOL]
to select the memory
channel. (p.27, 61)
• The call channel cannot be cleared.
③ Perform the following operation within 1.5 sec,
otherwise the transceiver returns to the memory
mode without clearing the memory.
➥ Push
[A•FUNC]
, then push
[C•MR]
momentarily.
➥ Push
[A•FUNC]
, then push and hold
[C•MR]
for 1
sec.
• The contents of the selected memory are
cleared.
④ Push
[D•CLR]
to return to regular operation.
8.7 Memory bank selection
The MT-V82N has a total of 10 banks (A to J). Each
memory channel, 0 to 199, may be assigned to one
of the banks for easy memory management.
① Push
[C•MR]
to select memory mode.
② Push
[A•FUNC]
and
[#•BANK]
to
enter memory bank selection.
• Bank indicator blinks.
③ Rotate
[VOL]
to select the desired bank, A to J.
• Banks that have no programmed contents are
skipped.
④ Push
[
✱
•ENT ]
(or
[D•CLR]
) to select the bank.
• Indicator stops blinking.
MEMORY/CALL OPERATION
MR
C
FUNC
A
Push
39
SECTION 8SECTION 8