BASIC OPERATION
6.4 Setting audio/squelch level
To set the audio level
Rotate
[VOL]
to set the desired
audio level while receiving a
signal.
• When no signal is received,
push and hold
[MONI]
while
setting the audio level.
• When
[VOL]
is assigned as tuning
dial, push
[▲]
/
[▼]
to adjust the
audio output level. (p.27,
61)
To set the squelch level
While pushing
[MONI]
, push
[▲]
/
[▼]
to set the squelch level.
• The squelch level “1” is loose
squelch, “10” is tight squelch.
• When
[VOL]
is assigned as tuning
dial, rotate
[VOL]
while pressing
[MONI]
. (p.27, 61)
6.5 Receive and transmit
①
Push and hold
[PWR]
for 1 sec. to turn the power
ON.
②
Adjust audio volume to the desired level.
③
Set the frequency.
When a signal is received:
• Squelch opens and audio is emitted from the
speaker.
• Signal indicator shows the relative signal
strength level.
④
Push
[A•FUNC]
, then
[9•H/M/L]
to select output
power between high, middle and low.
• “L” appears when low power is selected.
• “M” appears when middle power is selected.
• No indication appears when high power is
selected.
⑤
Push and hold
[PTT]
to transmit, then speak into
the microphone.
• “
T X
” appears.
• Do not hold the microphone too close to your
mouth or speak too loudly. This may distort the
signal.
28
SECTION 6SECTION 6
Summary of Contents for MT-V82N
Page 1: ...User Manual VHF FM Transceiver...
Page 2: ......
