9.1 Programming a DTMF code sequence
The transceiver has 16 DTMF memory channels
(d0 to dF) for storage of often-used DTMF code
sequence of up to 24 digits. DTMF memories are
used to store phone numbers or control codes.
①
Push
[A•FUNC]
, then push
[0•OPT]
to enter
OPTION SET
MODE
.
• Rotate
[VOL]
to select “dtm.OF,” if necessary.
②
Push and hold
[0•OPT]
for 1 sec. to select the
DTMF memory.
• One of “d0” to “dF” appears.
③
Rotate
[VOL]
to select the desired DTMF memory.
④
Push and hold
[0•OPT]
for 1 sec. to enter the DTMF
programming mode.
• “_ _ _ _ _” appears.
• Programmed memories can be cleared in this
way.
⑤
Enter the desired DTMF code sequence by
pushing the digit keys,
[A•FUNC]
,
[B•CALL]
,
[C•MR]
,
[D•CLR]
,
[#•BANK]
and
[
✱
•ENT ]
, in the desired
sequence.
• A maximum of 24 digits can be input.
•
[
✱
•ENT ]
enters
tone “E”,
[#•BANK]
enters tone “F.”
• If a digit is
mistakenly
input, push
[MONI]
or
[PTT]
momentarily
then repeat from step
①
.
DTMF MEMORY
Push
Push
Push
for 1 sec.
for 1 sec.
42
SECTION 9SECTION 9
Summary of Contents for MT-V82N
Page 1: ...User Manual VHF FM Transceiver...
Page 2: ......
