M-tech MT-V82N, User Manual

Page: 12 / 72

2.2 Your fi rst contact
Now that you have your MT-V82N ready, you are
excited to get on the air. We would like to walk you
through a few basic operational steps to make
your fi rst “On The Air” use an enjoyable experience.
About default setting
The
[VOL]
control function can be exchanged with
[▲]
/
[▼]
keys function in
INITIAL SET MODE
. However,
in this QUICK GUIDE, the factory default setting
(
[VOL]
controls audio output level) is used to simplify
instructions.
Basic operation
1. Turning ON the transceiver
Although you have purchased
a brand new transceiver, some
settings may be changed from the
factory defaults because of the
Quality Control process. Resetting
the CPU is necessary to start from
factory default.
➥ While pushing
[MONI]
and
[D•CLR]
, push and hold
[PWR]
for 1 sec. to reset the CPU and turn power
ON.
2. Adjusting audio output level
➥ Rotate
[VOL]
to set the desired audio level.
3. Adjusting the squelch level
➥ While pushing and holding
[MONI]
, push
[▲]
or
[▼]
to set the
squelch level.
4. Tune the desired frequency
The up/down keys,
[▲]
/
[▼]
, will
allow you to tune to the frequency
that you want to operate on.
Page 27 will instruct you on
how to adjust the tuning step size.
➥ Push
[▲]
or
[▼]
to adjust the
frequency.
QUICK GUIDE
10
SECTION 2SECTION 2