LXE MX5X, Reference Manual

Page: 276 / 296

AppLock Error Messages 259
E-EQ-MX5CERG-D MX5X Reference Guide
Message Explanation and/or corrective action Level
In app
hook:WM_WINDOWPOSCHANG
ED In addition to preventing the locked application from
exiting, AppLock must also prevent the application from
enabling the taskbar and resizing the application’s
window. This message traps a change in the window
position and corrects it. LOG_EX
Initializing keyboard hook
procedure AppLock is calling the keyboard hook initialization. LOG_PROCESSING
Keyboard hook initialization failure The keyboard filter initialization failed. LOG_ERROR
Keyboard hook loaded OK The keyboard hook dll exists and loaded successfully. LOG_EX
L after Ctrl Processing the backdoor entry. LOG_EX
Loading keyboard hook When AppLock first loads, it loads a dll that contains
the keyboard hook processing. This message is logged
prior to the load attempt. LOG_PROCESSING
Open failure The status information is being saved to a file and the
file open has failed. This could occur if the file is write
protected. If the file does not exist, it is created. LOG_ERROR
Open registry failure If the Administration registry key does not exist, the
switch to user mode fails because the AppName value in
the Administration key is not available. LOG_ERROR
Opened status file The status information is being saved to a file and the
file has been opened successfully. LOG_EX
Out of memory for encrypted pwd Not enough memory to encrypt the password. LOG_ERROR
pRealTaskbarWndProc already set The taskbar control has already been installed. LOG_EX
Pwd cancelled or invalid-remain in
user mode The password prompt was cancelled by the user or the
maximum number of failed attempts to enter a password
was exceeded. LOG_EX
Read registry error-hot key The hotkey registry entry is missing or empty. This is
not considered an error. The keyboard hook uses an
embedded default if the value is not set in the registry. LOG_ERROR
Read registry failure-app name AppName registry value does not exist or is empty.
This constitutes a failure for switching into user mode. LOG_ERROR
Read registry failure-Cmd Line AppCommandLine registry entry is missing or empty.
This is not considered an error since command line
information is not necessary to launch and lock the
application. LOG_ERROR
Read registry failure-Internet The Internet registry entry is missing or empty. This is
not considered an error since the Internet value is not
necessary to launch and lock the application. LOG_ERROR
Registering Backdoor MSG The AppLock system communicates with the keyboard
hook via a user defined message. Both AppLock.exe
and Kbdhook.dll register the message at initialization. LOG_PROCESSING
Registering Hotkey MSG The AppLock system communicates with the keyboard
hook via a user defined message. Both AppLock.exe
and Kbdhook.dll register the message at initialization. LOG_PROCESSING
Registry read failure at reenter user
mode The registry has to be read when entering user mode is
the AppName is missing. This user mode entry is
attempted at boot and after a hotkey switch when the
administrator has closed the application being locked or
has changed the application name or command line. LOG_ERROR
Registry read failure at reenter user
mode The registry has to be read when switching into user
mode. This is because the administrator can change the
settings during administration mode. The read of the
registry failed which means the Administration key was
not found or the AppName value was missing or empty. LOG_ERROR
Registry read failure The registry read failed. The registry information read
when this message is logged is the application
information. It the Administration key cannot be opened
or if the AppName value is missing or empty, this error
is logged. The other application information is not
required. If the AppName value is not available,
AppLock cannot switch into user mode. LOG_ERROR