LXE MX5X, Reference Manual

Page: 156 / 296

138 Barcode Tab
MX5X Reference Guide E-EQ-MX5CERG-D
Barcode Tab
Access: | Settings | Control Panel | Scanner | Barcode tab
The Scanner application (Wedge) can only enable or disable the processing of a barcode inside the
Wedge software.
The Scanner application enables or disables the Code ID that may be scanned.
Enabling or disabling a specific barcode symbology is done manually using the configuration
barcode in the
Integrated Scanner Programming Guide (available on the LXE Manuals CD and
the LXE ServicePass website).
Choose an option from the Enable Code ID drop-down box: None, AIM ID, Symbol ID, or
Custom ID.
Figure 4-4 Scanner Control / Barcode tab
Buttons
Symbology Settings -- Individually enable or disable a barcode from being scanned, set the
minimum and maximum size barcode to accept, strip Code ID, strip data from the beginning or
end of a barcode, or (based on configurable Barcode Data) add a prefix or suffix to a barcode
before transmission.
Ctrl Char Mapping -- Define the operations the LXE Wedge performs on control characters
(values less than 0x20) embedded in barcodes.
Custom Identifiers -- Defines an identifier that is at the beginning of barcode data which acts as a
Code ID. After a Custom Identifier is defined, Symbology Settings can be defined for the
identifier just like standard Code IDs.
See Also: Barcode Processing Overview earlier in this chapter.