220
Setup a New Device
MX5X Reference Guide
E-EQ-MX5CERG-D
Setup a New Device
Prerequisites:
•
The touch panel must be enabled. Refer to the (
Start | Settings | Control Panel | Handheld |
Misc |
) Touch Panel Disabled setting.
•
An MX5X default input method (Input Panel, Transcriber, or custom input method) is
assigned.
LXE CE devices with the AppLock feature are shipped to boot in Administration mode with no
default password, thus when the device is first booted, the user has full access to the device and no
password prompt is displayed. After the administrator specifies applications to lock, a password is
assigned and the device is rebooted or the hotkey is pressed, the device switches to end-user mode.
Briefly, the process to configure a new device is as follows:
1.
Insert a fully charged battery and press the Power button. See
Chapter 1 – Introduction
for
instruction.
2.
Connect an external power source to the device (if required). See
Chapter 1 – Introduction
for
instruction.
3.
Adjust screen display, audio volume and other parameters if desired. Install accessories (e.g.
handstrap, stylus). See
Chapter 1 – Introduction
for instruction.
4.
Tap Start | Settings | Control Panel | Administration icon.
5.
Assign a Switch Key (hotkey) sequence for AppLock. See
Security Panel
.
6.
Assign an application on the Application tab screen. More than one application can be
assigned. See
Application Panel
.
7.
Assign a password on the Security tab screen. See
Security Panel.
8.
Select a view level on the Status tab screen, if desired. See
Status Panel
.
9.
Tap OK.
10.
Press the Switch Key sequence to launch AppLock and lock the configured application(s).
11.
The device is now in end-user mode.
Note: LXE has made the assumption, in this appendix, that the first user to power up a new
mobile device is the system administrator.
Note: AppLock cannot support multiple windows of some applications. Attempting to open
multiple windows of RFTerm or Pocket Word will cause AppLock to switch to
administration mode.
See Also: Appendix C – Reference Material, sections titled AppLock Error Messages and
AppLock Registry Settings.
Summary of Contents for MX5X
