LXE MX5X, Reference Manual

Page: 113 / 296

Control Panel Options 95
E-EQ-MX5CERG-D MX5X Reference Guide
Main
Version 1 Version 2
Figure 3-18 Scanner Properties / Main Tab
Adjust the settings and tap the OK box to save the changes. The changes take effect immediately.
If Send Key Messages … is checked any data scan is converted to keystrokes and sent to the
active window. When this box is not checked, the application will need to use the set of LXE
Scanner APIs to retrieve the data from the scanner driver. Note that this latter method is
significantly faster than using Wedge.
Version 1
If Translate Control Codes is checked, unprintable ASCII characters (characters below 20H) in
scanned barcodes are assigned to their appropriate CTRL code sequence when the barcodes are
sent in Character mode.
When Translate Control Codes is not checked and Send Key Messages is checked, CTRL codes
are passed through in Block mode.
See Also: Appendix C Reference Material section titled ASCII Control Codes.