LXE MX5X, Reference Manual

Page: 244 / 296

Multi-Application Configuration 227
E-EQ-MX5CERG-D MX5X Reference Guide
Launch Button
Note: The Launch button may not be available in all versions of Multi-AppLock. Contact your
LXE representative for assistance, downloads and AppLock update availability.
When clicked, displays the Launch options panel for the Filename selected on the Administration
panel.
Figure 6-5 Application Launch Options
Note: Launch order is determined by the Order specified in the Application tab. The Order
value does not have to be sequential.
Auto At Boot
Default is Enabled. Auto At Boot, when enabled, automatically launches (subject to the specified
Delay in seconds) the application after the unit is rebooted. If a Delay in seconds is specified,
AppLock waits for the specified period of time to expire before launching the application. The
Delay default value is 10 seconds; valid values are between 0 (no delay) and a maximum of 999
seconds.
Auto At Boot Retries is the number of times the application launch will be retried if a failure
occurs when the application is automatically launched at bootup. Valid values are between 0 (no
tries) and 99 tries or -1 for infinite. Infinite tries ends when the application successfully launches.
The default is 0 retries.
Auto At Boot Delay timer is the time that AppLock waits prior to the initial launch of the selected
application when it is automatically launched at bootup. Delay default is 10 seconds. Valid values
are between 0 seconds (no delay) and 999 seconds.
The Auto At Boot delay is associated for each application; it will be either a value specified by the
Administrator or it will be the delay default value. At startup, when a delay has been assigned for
each application, AppLock waits for the delay associated with the first application to expire before
launching the first application then AppLock waits for the delay associated with the second
application to expire before launching the second application. AppLock continues in this manner
until all applications are launched.
Note: A Global Delay can be accomplished by setting a timed delay for the first application to
be launched (by lowest Order number) and no delay (0 seconds) for all other
applications.
Note: Launch order is determined by the Order specified in the Application tab. The Order
value does not have to be sequential.