LXE MX5X, Reference Manual

Page: 202 / 296

Cisco Client Configuration 185
E-EQ-MX5CERG-D MX5X Reference Guide
Cisco Client Configuration
Prerequisites
•
Windows CE .NET 4.2 operating system
•
Network SSID or ESSID number of the Access Point
•
WEP or LEAP Authentication Protocol Keys
Aironet Client Utility (ACU)
Access: | Aironet Client Utility or ACU Icon on Desktop
Note: When making changes to profile parameters, the mobile device should be warmbooted
afterwards.
Note: To configure WPA, please see Cisco Wireless Security, later in this chapter.
Profiles Tab
Use this option to manage profiles and review firmware information, status, statistics and wireless
device survey data.
Profile Parameter Default
SSID Blank
Client Name
Blank
Infrastructure Mode Yes
Power Save Mode Fast PSP
Network Security Type None
WEP No WEP
Authentication Types Open
LEAP Disabled
Mixed Mode
Disabled
World Mode Disabled
Data Rates Auto
Transmit Power MAX
Offline Channel Scan Enabled
Select an active profile to manage. Tap the WEP Keys button to enter WEP information. If a key
is already entered, the Already set? checkbox is checked. The previously entered key value is not
displayed for security.
Firmware Tab
Displays the current firmware version and allows you to load new firmware. Tap the Browse
button to locate the new firmware file.
Status Tab
Immediately runs status on signal strength and signal quality.
Statistics Tab
Select the Receive Stats or Transmit Stats. The data is displayed on the screen.