![background image](http://html1.mh-extra.com/html/lutron-electronics/grafik-eye-qsg-3pce/grafik-eye-qsg-3pce_installation-and-operation-manual_1950591014.webp)
R
GRAFIK Eye
®
QS System Installation and Operation Guide 14
Zone Button Operation
Name a Zone
1. Enter programming mode (see page 12).
2. Use the master buttons to highlight “Zone setup”
and press the OK button to accept.
3. Use the master buttons to highlight “Label” and
press the OK button to accept.
4. Use the master buttons to change the zone
number to your desired zone. Custom zone labels
will appear if previously set. Press the OK button
to accept.
5. Use the master buttons to highlight “Custom” and
press the OK button to accept. Or, highlight
“Default” to return the zone label to the default
(e.g., Zone 1).
6. Use the master buttons to scroll through the
characters (lowercase and uppercase letters, plus
numbers 0-9). The character you are currently
changing will be underlined on the screen. Press
OK to select the character you want, then repeat
for all available characters. Choose a space (no
character) and press OK for any remaining
characters. Press the OK button to accept.
Note:
Custom zone labels will always begin with
the zone number and a colon (e.g., 1: Uplights).
7. The info screen will display a confirmation screen
that your name has been saved.
8. Exit programming mode (see page 12).
Main menu
Occ sensor
Scene setup
Zone setup
Zone setup
Min level
Select zone:
Zone 2
Label
Label zone 2
Custom
Label zone 2
1: A
A
1 / 12
OK
Master
buttons
OK
button
Saved
Saved