![background image](http://html1.mh-extra.com/html/lutron-electronics/grafik-eye-qsg-3pce/grafik-eye-qsg-3pce_installation-and-operation-manual_1950591030.webp)
Activate System Accessories
Once your control unit is programmed,
you will need to activate any accessories
or interfaces that are a part of the
system. Refer to the instructions that
accompanied those devices to set them
up for proper communication with the
GRAFIK Eye
QS control unit.
Faceplate Removal
The faceplates may need to be removed
to change the color or to write in zone
labels. To remove either faceplate, open it
fully (flush to the wall), and pull up (for the
top faceplate) or down (for the bottom
faceplate) to pull the hinges out of their
slots.
Replace by sliding the hinges back into
their slots.
R
GRAFIK Eye
®
QS System Installation and Operation Guide 30
OK
1
2
3
4
5
6
Pull up to remove
top faceplate
Pull down to remove
bottom faceplate