R
GRAFIK Eye
®
QS System Installation and Operation Guide 25
Timeclock Operation
Add an Event
1. Enter programming mode (see page 12).
2. Use the master buttons to highlight “Timeclock” and press the OK
button to accept.
3. Use the master buttons to highlight “Add events” and press the OK
button to accept.
4. Use the master buttons to select the day of the week for this event;
press the OK button to accept.
5. Use the master buttons to select the type of event (fixed time of
day, or relative to sunrise or sunset); press the OK button to accept.
6. For a fixed-time event, use the master buttons to select the hour for
your event to begin; press the OK button to accept. Repeat for the
minutes.
For a relative time event, use the master buttons and the OK button
to set the hour, then the minutes relative to sunrise or sunset
(maximum of 1 hour 59 minutes before or after sunrise or sunset).
7. Use the master buttons to select the scene you wish to activate for
this event.
For a timeclock event involving only shades, scroll through the
scenes to find the group of shades and the action (1, 2, or 3; open,
preset, or close) you want to add to the timeclock event.
Or, press the button on the shade column that produces the action
you want to add to this timeclock event.
Press the OK button to accept.
8. The info screen will display a confirmation screen that your event
has been saved.
9. Exit programming mode (see page 12).
OK
Master
buttons
OK
button
Main menu
Timeclock
Scene setup
Timeclock
View events
Delete events
Add events
Timeclock
Add
Time of day
Add
Monday
Add
Del: 00 AM
08
Add
Scene
Scene 1
Saved
Saved