![background image](http://html1.mh-extra.com/html/lutron-electronics/grafik-eye-qsg-3pce/grafik-eye-qsg-3pce_installation-and-operation-manual_1950591024.webp)
Set Daylight Saving Time
1. Enter programming mode (see page
12) and select “Timeclock”. Use the
master buttons to highlight “Set
DST” and press the OK button to
accept.
2. Use the master buttons to highlight
“YES” if your location observes
daylight saving time, or “NO” if it
does not. Press the OK button to
accept.
3. If yes, use the master buttons to
choose either “USA 2007” (the
second Sunday in March to the first
Sunday in November), or “Other.”
For “Other,” follow the screens to
set start and end dates and amount
of time.
4. Press the OK button to accept. The
info screen will display a
confirmation screen that your time
and date have been saved.
5. Exit programming mode (see page
12).
R
GRAFIK Eye
®
QS System Installation and Operation Guide 24
Timeclock Operation
Set Location
1. Enter programming mode (see page 12).
2. Use the master buttons to highlight
“Timeclock” and press the OK button to
accept.
3. Use the master buttons to highlight
“Location” and press the OK button to
accept.
4. Use the master buttons to choose to set
your location by either country and city
or latitude and longitude. Press the OK
button to accept.
5. Use the master buttons to highlight the
country and press the OK button to
accept. Repeat for the state and closest
city.
6. The info screen will display a
confirmation screen that your time and
date have been saved.
7. Exit programming mode (see page 12).
OK
Master
buttons
OK
button
Main menu
Timeclock
Scene setup
Timeclock
Time & date
Delete event
Location
Location by
Lat/Longitude
Country, City
Timeclock
State
Pennsylvania
City
Philadelphia
Country
08 : 00
USA
Timeclock
Location
Delete event
Set DST
Use DST?
Del: 00
YES
Saved
Saved