28
EcoSystem
®
Programmer
Configuring Ballasts
The factory default settings for ballasts are: high level = 100% and
emergency setting = 100%. Each of these settings can be
customized to meet specific lighting needs.
1
1 From the Main Menu, tap
B
Ba
alllla
as
stts
s and then C
Co
on
nffiig
gu
urre
e
B
Ba
alllla
as
stt.
2
2 Read the instructions, then
tap
to continue.
3
3 Point the programmer at any
IR control device, then tap
to begin communication.
4
4 If the fixture connected to the
control device flashes and
other fixtures go to minimum
brightness, tap
.
5
5 Scroll to a specific ballast (its
fixture will flash). Tap
to
select it.
-
OR -
To configure all the ballasts,
select C
Co
on
nffiig
gu
urre
e A
Allll B
Ba
alllla
as
stts
s.
6
6 If selected ballasts go to full
brightness and other fixtures
go to minimum brightness, tap
.
Refer to the following topics to:
• Set high end trim
• Set the emergency level
• Season lamps
• Perform additional ballast
configuration options
5
5
-OR-
1
1