Programming Guide
19
7
7 Select the daylight row to be
set.
8
8 Scroll to the desired fixture
(selected fixture will flash). Tap
+
+ to add the fixture to the row,
or –
– to remove it. Repeat for
each fixture to be added or
removed from the row.
9
9 Select D
Do
on
ne
e.
1
10
0 Set the light level to be
maintained throughout the day
for the row. Perform this step
when a typical amount of
daylight is in the space.
Tap the down arrow button to
decrease the compensation
level. Doing this will increase
the fixture light output.
Tap the up arrow button to
increase the compensation
level, which will decrease the
fixture light output.
NOTE: Changes happen
gradually and may not be
noticeable without a light meter.
Repeat this procedure to set the
daylight light levels for each row
of fixtures in each daylight sensor
group.
1
11
1 Select D
Do
on
ne
e.
1
12
2 Select S
Se
ettu
up
p A
An
no
otth
he
err S
Se
en
ns
so
orr
to set up another daylight
sensor. Or select D
Do
on
ne
e to exit.
1
13
3 When done, if all fixtures flash
and go to high level, tap
.
1
10
0
1
11
1
7
7
9
9
8
8