22
EcoSystem
®
Programmer
Setting Light Levels for Contact Closures
Occupied and unoccupied light levels can be set for each fixture in
a contact closure group. The default occupied setting is the ballast’s
high level; the default unoccupied setting is OFF. Contact closure
levels can be configured from any IR receiver. These settings apply
only if the contact closures are set to Normal Mode. Refer to
page 42 for information on contact closure modes.
1
1 From the Main Menu, tap
D
De
evviic
ce
e S
Se
ettu
up
p and then
C
Co
on
ntta
ac
ctt C
Cllo
os
su
urre
es
s.
2
2 Read the instructions. Point
the programmer at any IR
control device, then tap
to
continue.
3
3 Select C
Co
on
ntta
ac
ctt C
Cllo
os
su
urre
e S
Se
ettu
up
p.
4
4 Select C
Co
on
ntta
ac
ctt C
Cllo
os
su
urre
e 1
1 or
C
Co
on
ntta
ac
ctt C
Cllo
os
su
urre
e 2
2.
5
5 If a group of fixtures goes to
full brightness and other
fixtures go to minimum
brightness, tap
.
6
6 Select S
Se
ett O
Oc
cc
cu
up
piie
ed
d L
Le
evve
ell or
S
Se
ett U
Un
no
oc
cc
cu
up
piie
ed
d L
Le
evve
ell.
7
7 If fixtures in the group go to
their occupied/unoccupied
level, tap
.
8
8 Tap the occupied or
unoccupied light level. If
needed, use the arrow keys to
adjust the selected level
incrementally.
3
3
1
1