5
6
7
Wire
Connector
8
Lutron
|
11
Need help? Contact Lutron Technical Support 24/7: 800.523.9466
Install dimmer or switch
brass screws
black
screw
Mount dimmer or switch
Turn power on at circuit
breaker or replace fuse
Replace wallplate
OR
Designer
Traditional
brass screws
ground wire
green wire
Switch
Dimmer
neutral wire
ground wire
green wire
A.
Connect the green
or bare wire (ground
wire) to the green wire
on the dimmer/switch
with a wire connector.
B.
Connect the tagged wire to
the black colored screw on
the dimmer/switch.
C.
Connect one of the remaining wires
to either of the gold
colored screws (brass) on
the dimmer/switch.
D.
Connect the remaining wire to the
remaining gold colored screw (brass)
on the dimmer/switch.
E.
For AuroRa
®
switch connect the
neutral (usually white) wire to the
silver colored screw on the switch
using white wire provided by Lutron.
(see page 22 for additional info)
black
screw
neutral wire
silver screw
✓
Helpful Hint:
See page 6—installing
the designer insert if
using designer wallplate.
white wire
(provided
by Lutron)
To avoid fire, shock or death,
if breaker trips
do not
reset
breaker to “on” again until
fault has been corrected.
WARNING
