5
6
8
7
Wire
Connector
Lutron
|
9
Need help? Contact Lutron Technical Support 24/7: 800.523.9466
Mount dimmer or switch
Turn power on at circuit
breaker or replace fuse
A.
Connect the green
or bare wire (ground
wire) to the green wire
on the dimmer/switch
with a wire connector.
B.
Connect one wire to the black
screw on the dimmer/switch.
C.
Connect the other wire to
either one of the two gold
colored screws (brass) on the
dimmer/switch.
D.
Tighten the brass screw that is not
being used.
E.
For AuroRa
®
switch connect the
neutral (usually white) wire to the
silver colored screw on the switch
using white wire provided by Lutron.
(see page 22 for additional info)
brass screws
ground wire
green wire
black
screw
Install dimmer or switch
Replace wallplate
✓
Helpful Hint:
See page 6—installing
the designer insert if
using designer wallplate.
OR
Designer
Traditional
brass screws
ground wire
green wire
black
screw
Switch
Dimmer
neutral wire
neutral wire
silver screw white wire
(provided
by Lutron)
To avoid fire, shock or death,
if breaker trips
do not
reset
breaker to “on” again until
fault has been corrected.
WARNING
