Lutron
|
2
Need help? Contact Lutron Technical Support 24/7: 800.523.9466
FCC Information
NOTE: This equipment has been tested and found
to comply with the limits for a Class B digital device,
pursuant to part 15 of FCC rules. Operation is
subject to the following:
1.
This device may not cause harmful interference, and
2.
This device must accept any interference received,
including interference that may cause undesired
operation. The user is encouraged to try to correct
the interference by one or more
of the following measures:
•
Re-orient or relocate the receiving antenna.
•
Increase the separation between the equipment
and receiver.
•
Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
•
Consult the dealer or an experienced radio/TV
technician for help.
Note:
Changes or modifications not expressly
approved by Lutron Electronics Co. may void the
user’s authority to operate this equipment.
To avoid risk of overheating or possible burns,
do no exceed max ratings for dimmers/switches
(multi-gang locations require derating).
To avoid fire, shock or death, turn power off at
corresponding circuit breaker or remove fuse
before removing or installing any dimmers or
switches.
To avoid fire, shock or death, turn off power. If a
circuit breaker trips following resetting, DO NOT
reset to “on” again until the cause has been
corrected. Repeated closing of a circuit breaker
on an electrical overload can damage it and
electrical fires can result.
To avoid overheating, fire and possible damage
to equipment, use dimmers with 120 V~
incandescent lighting fixtures only. Do not use
with low-voltage transformers.
To avoid overheating, fire and possible damage to
dimmer / switch or other equipment, do not use
dimmers / switches to control receptacles, motor-
operated or transformer-supplied appliances.
To avoid fire, shock or death, if you cannot clearly
identify the neutral connection stop the installation
and contact a qualified electrician or call Lutron’s
24/7 Customer Support Center at 800.523.9466.
To avoid fire, shock or death, if you are unsure
about any part of these instructions consult a
qualified electrician.
important safety information
WARNING
CAUTION
