Lutron
|
6
Need help? Contact Lutron Technical Support 24/7: 800.523.9466
installing a dimmer/switch
Your first step is to identify how many switches control the lights you
have decided to add to your system.
•
This is important so that you use the correct installation instructions.
•
Lutron has created specific instructions for lights controlled by one,
two, or three switches to help simplify your installation.
After you have installed the first dimmer/switch, repeat the process
until all of the
AuroRa
dimmers/switches have been installed.
Installing an AuroRa
®
dimmer/switch is as simple
as replacing a light switch
Installing the
designer insert
(use with designer
opening wallplates)
Designer-style
Wallplate Inserts allow
Lutron Traditional-
style dimmers and
switches to be used
with designer-style
wallplates.
A.
Slide the insert over the dimmer/
switch, making sure to line up
the pins on the back of the
insert with the screw holes on
the dimmer/switch as shown.
B.
Press the insert firmly in place.
Designer
Wallplate
Designer
Insert
C.
Re-install the wallplate.
