Lunar DPX-IQ, Operator'S Manual, Page: 60 / 166

A-4 AP Spine DPX-IQ Operator’s Manual
3. Select
)
. The Profiles screen is shown. Make sure the position of the baseline and
edge markers are correct. Are changes necessary?
• If yes, use the options shown on the screen to change the baseline and/or
edge markers.
• If no, continue with step 5.
NOTE: Refer to section A.3.3 to analyze Body ROIs.
4. Select
!
. The Bone Results screen is shown.
5. Use the arrow keys to highlight the region to be shown on the Analysis Results screen.
6. Select
!
. The Analysis Results screen is shown. Refer to figure A-4, which shows
the two possible graphic styles you may see. For AP spine analysis, you can choose to
display a WHO Fracture Risk graph (shown on the right) instead of the Lunar
Standard graph (shown on the left). Refer to section 4.2.3 for an explanation of the
Fracture Risk graph and for more information about changing Printout Display
Options in the General Default Settings.
7. Select
#
to save changes.
8. Select
$
and record the necessary number of Analysis Results and/or Ancillary
reports (figures A-5 and A-6). Select
!
to print the reports.
Figure A-4. Analysis Results screen