Lunar DPX-IQ, Operator'S Manual, Page: 49 / 166

DPX-IQ Operator’s Manual Default Settings 4-3
4. Select
0
. The Printer Type menu is shown. Highlight the necessary printer.
Select
!
.
5. Do you have more than one printer?
•
If yes,
highlight Port2 and complete step 4 again. If necessary, complete this step
again for Port3. Continue with step 6.
• If no, continue with step 6.
6. Highlight Active Port. Select the number that relates to the necessary Printer Port.
7. Select
!
, then
/
to go back to the Options screen.
4.2 General Default Settings
Select
'
at the Options screen to access the Default Settings screen. The Default
Settings screen lets you change the settings that follow: Report Heading,
Miscellaneous defaults, and Printout Display. Each default is given in this section.
4.2.1 Report Heading
The Report Heading is shown on the Default Settings screen after you select
'
. The
report heading has three lines of information which let you personalize analysis
printouts: a typical heading can show the name of your institution, department or
physician's name, and address of your institution.
NOTE: The Report Heading option is shown as
#
on the Miscellaneous
and Printout Display screens.
To change the heading, move the cursor to each line and record the necessary
information. Select
/
then
(&
to save changes.
4.2.2 Miscellaneous Defaults
1. At the Default Settings screen, select
$
to show miscellaneous default options.
Each default is given on the pages that follow.
2. Move the cursor to a default setting. The default's options are shown.
3. Select the number key that relates to the necessary default setting. Select
/
then
(
to save changes.
Patient ID Type
Patient ID Type sets the format used to identify patients. The current ID is shown at
the top of the Bone Results, Verify Values, Profiles, Analysis Results screens, Results
printouts, and Ancillary printouts. The default setting is “Last Name.” Other possible
options are listed on the screen when you highlight Patient ID.