manualshive.com logo in svg

Lunar DPX-IQ, Operator'S Manual, Page: 8 / 166

Share
Download
Lunar DPX-IQ Operator'S Manual Download Page 8

viii

Table of Contents

DPX-IQ Operator’s Manual

2.3.3 Add Patient or Select Patient  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-5

Optional Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-5

2.3.4 Update Mandatory Information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-5
2.3.5 Stop a Scan Image Acquisition. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-6

Start a New Scan  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-6
End the Scan  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-6
Continue the Scan  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-6

2.4 Basic Analysis Procedures  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-6

2.4.1 Select Patient Scan File  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-7
2.4.2 Adjust the Scan Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-7

Type   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-7
Filtering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-7
Interpolation   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-7
Scaling Factor  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-7
Centering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-7
Grey Scale  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-8

2.4.3 Analyze the Scan Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-8
2.4.4 Print Analysis Results. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-8

Examine Analysis Results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-8
Print a DICOM Report (optional)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-9

2.5 Patient Trending  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-9

2.5.1 Chronological Results Screen Options . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-10
2.5.2 Graph and Print Patient Results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-10

2.6 Archive Scan Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-11

2.6.1 Procedure to Archive Patient Scan Files  . . . . . . . . . . . . . . . . . . . . . . . . . .  2-11

Change Archive Destination and Directory   . . . . . . . . . . . . . . . . . . . . . .  2-12

Chapter 3: Quality Assurance

3.1 Quality Assurance Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-1

3.1.1 Complete a QA Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-1
3.1.2 Collimation Ratio Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-3
3.1.3 Quality Assurance Warning Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-3

No Valid QA Results within the Past 48 Hours  . . . . . . . . . . . . . . . . . . . .  3-3
No Valid QA Results within the Past 2 Weeks . . . . . . . . . . . . . . . . . . . . .  3-4

3.2 Spine Phantom Quality Assurance Test  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-4

3.2.1 Scan the Spine Phantom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-4
3.2.2 Analyze the Spine Phantom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-7

3.3 Monitor Precision Over Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-8

Chapter 4: Default Settings

4.1 Print Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-1

4.1.1 Print Manager Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-1
4.1.2 Set the Delayed Print Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-2
4.1.3 Choose a Printer and Active Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-2

4.2 General Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-3

4.2.1 Report Heading. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-3
4.2.2 Miscellaneous Defaults  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-3

Patient ID Type  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-3
Height/Weight Units  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-4
Date Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-4
Full Name on a Printout   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-4
Report Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-4

Summary of Contents for DPX-IQ







































































































































































Reviews:

No comments