Lunar DPX-IQ, Operator'S Manual, Page: 51 / 166

DPX-IQ Operator’s Manual Default Settings 4-5
Show Selected ROI Only
Show Selected ROI Only sets the ROIs shown in the Type IQ Results Printout. If set
to “Yes,” only the ROI you select shows on the first page of the printout. All ROIs
continue to be shown on the Ancillary page printout.
Standardized BMD
Standardized BMD sets the information shown on the Analysis Results screen during
scan analysis. If set to “Yes,” the Standardized BMD shows on the Analysis Results
screen for AP Spine L2–L4, total femur, and femur neck.
Vertebral Height Z-Score
Vertebral Height Z-Score sets the information shown on the Analysis Results screen
during AP Spine analysis only. If set to “Yes,” the Vertebral Height Z-Score shows on
the Analysis Results screen and the Results printouts.
4.2.3 Printout Display Options
1. At the Report Heading screen, select
%
. The Printout Display screen is shown.
2. Highlight the value to be changed, then select
%
to turn the option ON or
)
to turn
the option OFF. Each option is given in this section.
3. Select
/"
to exit Default Settings,
#
to change the Report Heading, or
$
to
change Miscellaneous Values.
Young Display
Young Display shows the Reference graph on the printout (
➊
in figure 4-3). In
addition, it shows % Young Adult and T-Score below the Reference Graph.
Age Display
Age Display shows the Age-Matched Regression Bar on the Reference Graph (
➋
in
figure 4-3). In addition, it shows % Age Matched and Z-Score below the
Reference Graph.
Normals Graph Color Bars
Normals Graph Color Bars shows the color bars on the Reference graph. The color
bars give standard deviations from the mean % Young Adult value.
Normals Graph Type
Normals Graph Type selects one of two types of graphs: Lunar Standard and WHO
Fracture Risk. Lunar Standard, the default setting, is shown in figure 4-1 below.