Model 4525 Gate Monitor
Operator’s Manual
Ludlum Measurements, Inc.
Page 56
May 2018
The Camera tab is used to configure an Ethernet camera to be used to capture
an image during the occupancy. There are two options available for cameras:
Streaming – This displays a live streaming image on the main screen.
Currently only IQeye cameras support this option.
Static – This option only updates the main screen when the camera is
triggered during the entrance or exit.
The Supervisor software uses the static method for retrieving the image used in
the alarm popup and for saving to disk. The streaming method is only used to
update the main screen.
Camera Enabled:
Enable or disable the camera for this lane.
IP Address:
Sets the IP Address for the camera.
URL (Stream/Image):
Sets the URL required for telling the camera to start
pushing images (stream) and for retrieving a static image. There are samples for
various manufacturers as the bottom of this screen. The top field is used for the
streaming URL, and the bottom field is used for the retrieval of static images.
Trigger:
Sets when the camera is triggered to get an image. The choices are
entrance or exit.
