Model 4525 Gate Monitor
Operator’s Manual
Ludlum Measurements, Inc.
Page 18
May 2018
7.
Set the drive letter to “Z:” and check “Reconnect at logon.”
8.
Click “Finish.”
On the Options screen of the Supervisor and Data Viewer enter the location to
the Supervisor share. Examples:
X:\
Z:\
\\supervisor\SupervisorShare\
\\computer-name\share-name\
Station Configuration - Supervisor
1.
Start the Supervisor application. If this is the first time, the station will be
set to “Unknown.”
2.
Click on the Tools menu and select Options.
3.
Click on the Station Configuration tab.
4.
Set the station ID to “Supervisor.” There can only be one computer
designated as the Supervisor station. All other computers must be Echo
stations.
5.
Click on the Save button. The Supervisor application must be restarted for
the station ID change to take effect.
Station Configuration - Echo
1.
Start the Supervisor application. If this is the first time, the station will be
set to “Unknown.”
2.
Click on the tools menu and select Options.
3.
Click on the Station Configuration tab.
4.
Set the station ID to Echo.
5.
Enter the path to the Supervisor share. This can either be a mapped drive
(z:\) or a UNC path (
\\Supervisor\SupervisorShare
).
6.
Enter the Supervisor’s name or IP address. The IP address can be found by
looking at the Supervisor application’s title bar on the computer configured
as the Supervisor Station.
7.
Click on the Save button. The Supervisor application must be restarted for
the station ID change to take effect.
