Model 4525 Gate Monitor
Operator’s Manual
Ludlum Measurements, Inc.
Page 41
May 2018
Searching for RPMs
Use the Tools/Search Network… menu option to search the network for new
RPMs.
Click the Search button to begin searching for RPMs. When all available RPMs
have been found, click the Save button. As each RPM is found, the Supervisor
software retrieves its unit ID and displays it next to the IP Address. The
Supervisor software displays several codes when retrieving the unit ID if a
problem occurs. They are:
997 – Supervisor is unable to make a TCP connection.
998 – Network socket error.
999 – Supervisor timed out waiting for response to unit ID command.
Assigning RPMs to a Lane
Use the Tools/Assign RPMs… menu option to assign RPMs to a lane. This
screen also allows an RPM to be enabled or disabled and to move an RPM
assignment from one lane to another.
