Slot Card Specifications
Ethernet-3 slot card
APX 1000™ Getting Started Guide
B-11
Ethernet-3 slot card
The Ethernet-3 slot card (TNT-SL-E100-V-C) has one full-duplex 10/100Mbps port that is
designed to have a high packet-per-second throughput. The Ethernet-3 card automatically
detects the speed and duplex mode of its peer, but does not support autonegotiation, in which
Ethernet devices negotiate a common speed and duplex mode. If the Ethernet-3 slot card
detects an incompatible speed and duplex mode, it drops the connection. For details, see the
APX/MAX TNT® Physical Interface Configuration Guide.
Status indicators
The Ethernet-3 card is illustrated in Figure B-9 and provides the status indicators described in
Table B-11.
Figure B-9. Ethernet 3 slot card
Specifications
Table B-12 describes the Ethernet-3 slot card specifications.
Table B-11.Ethernet-3 slot card status indicators.
Status
indicator
Description
A (Yellow)
ON indicates 10Mbps activity on the Ethernet interface.
B (Yellow)
ON indicates a 10Mbps connection to the Ethernet interface.
C (Green)
ON indicates 100Mbps activity on the Ethernet interface.
D (Green)
ON indicates a 100Mbps connection to the Ethernet interface.
Table B-12.Ethernet-3 card specifications
Category
Specification
Power requirements
35W
Interfaces per card
One full-duplex port
Connector requirements
Must meet Japanese Industrial Standards (JIS) C 5973.
Card dimensions
5.6 inches high x 10.7 inches long (14.2cm x 27cm)
Card weight
~2 pounds (0.9kg)
Operating humidity
0 to 90%, noncondensing
Operating temperature
32-122° F (0-50° C)
