Chapter 2
CellPipe
20H User Guide
27
Saving configuration...
Configuration saved.
Updating flash filing system ...
SDRAM size = 0x800000
Booting...
System starts...
4.6
Set up DHCP (Dynamic host configuration
protocol) server function
The DHCP server function allows hosts (PCs, etc.) to get
IP address and DNS server address from the router
automatically.
User has to set DHCP client on the computer required for
automatic IP assignment and turn off (close) DNS
function on the PC.
The DHCP server should be in the same subnet with LAN
IP address. Refer to the LAN IP address set for the
routing function (RFC1483 or IPoA or PPPoA or PPPoE)
previously.
4.6.1
Following example to set DHCP configuration:
> lan (with “enter” key to execute, same for all
commands)
> lan> dhcpserver 192.168.1.1 192.168.1.10
192.168.1.20 192.168.1.30
(There are two range of IP segment allowed for DHCP
server. both segment must be in the same subnet with
LAN IP address. Refer to the LAN IP address set for the
routing function (RFC1483 or IPoA or PPPoA or PPPoE)
