Chapter 1
CellPipe
20H User Guide
5
5
Management
CellPipe 20H supports simple, flexible and easy-to-operate
methods for management purpose. The CellPipe 20H can be
managed via the following paths, refer to Appendix B for
detailed information.
!
Console port – use the RS-232 cable for connecting
CellPipe 20H
to a console terminal or a PC running terminal
emulation program, such as Hyper Terminal, see Appendix
A for proper console setup.
!
Local Ethernet Port – connect the Ethernet port to
your local area network or to a PC directly, “Telnet”
CellPipe 20H
from any workstation in the LAN. The
default local Ethernet IP address is “192.168.1.1”.
!
CellPipe DSL port from remote site – while CellPipe
DSL connection is in service, you may remotely “Telnet”
20H
from a workstation networking to the CO equipment.
Note: As operating CellPipe DSL device requires technical
know-how and experience. It is recommended to manage
CellPipe 20H by qualified technical staffs only. Therefore a
password authentication is applied when you enter the
command line interface, consult your service provider for
obtaining the appropriate password.
