Chapter 2
28
CellPipe
20H User Guide
previously. For example 192.168.1.1 – start IP address of
segment 1; 192.168.1.10 – end IP address of segment 1;
192.168.1.20 – start IP address of segment 2;
192.168.1.30 – end IP address of segment 2)
Continue setting up DNS server address for assigning to
PC.
> lan> dhcpserver dns 210.65.18.1 210.65.18.20
(There are two DNS server address could be assigned –
for example 210.65.18.1 and 210.65.18.20. Your service
provide (ISP) should give you those address when you
subscribed service. Use them as right IP addresses )
4.6.2
Save the configuration to router permanently and
make settings effective by following steps below
>lan> home (with “enter” key to execute)
You can use “show” command to check your setting
again.
>> save (with “enter” key to execute)
Wait until the following message displayed on your
screen completely. Don’t power off the modem during this
stage.
Saving configuration...
Configuration saved.
Updating flash filing system ...
SDRAM size = 0x800000
Booting...
System starts...
