Chapter 2
12
CellPipe
20H User Guide
Enable Spanning tree? (y/n) : (setting Spanning tree “y”
for enable)
The following (example) will be displayed for checking
your setting
Configuration
MODE: Bridge
FUNCTION: R1483
Spanning Tree: Enable
# VPI
VCI
Package filter
1: 2
34
ANY
Preserve the configuration (y/n) : (“y” to use the setting
or “n” to leave without change. Start again to set
parameters)
Configuration will have no effect until after save and
restart.
All the parameters will not be effective under the setting
being saved and restart again. Above message is to
remind operator. Continue with save command
>> save (with “enter” key to execute)
Wait until the following message displayed on your
screen completely. Don’t power off the modem during this
stage.
Saving configuration...
Configuration saved.
Updating flash filing system ...
SDRAM size = 0x800000
Booting...
System starts...
