LT-Light TRITTON-24, User Manual

Page: 61 / 78

User Manual - Lesson 7 - Setup
LT
&
55
BEEP XF SCR ->
•
Select the option CT, with the cursors.
•
Press ENTER.
Now, to adjust the display contrast, use the up & down arrows keys. We can see the result of this
adjustment in the display.
BEEP - Acoustic signal
Select the option BEEP (In the second pages of the Setup menu):
Display 2: Set RST LNG CT
n n
BEEP
n n
XF SCR ->
•
Select the option BEEP, with the cursors.
•
Press ENTER.
To activate /deactivate the acoustic signal, ‘beep’. Here, we have the commands ON (beep active)
& OFF (beep deactivate). By default we have the option at ON, active.
XF - Crossfade type
Select the option XF (In the second pages of the Setup menu):
Display 2:
Set RST LNG CT
BEEP
n n
XF
n n
SCR ->
•
Select the option XF, with the cursors.
•
Press ENTER.
In the display:
n n
Xf
n n
DIPLESSon
By default the TRITTON crossfade is dipless. But the user can deactivate this characteristic.
About the dipless crossfade:
The dipless characteristic is applied to the channels that are in X1 and X2 at the same time. One
channel in X1 fades up at 0% and in the same time this channel in X2 fade at 100% level. When a
crossfade is dipless this channel never has (during the crossfade) a level inferior at the level stored
in X2 (target level). Example: The channel 1 is in X1, in scene, at 75%, and it is in X2, at 80%.
When we press GO, to start the crossfade: The channel 1 is maintained at 75%, until the X2 output
scopes this level, in this moment this channel is controlled for X2 and fades at 80%.