LT-Light TRITTON-24, User Manual

Page: 45 / 78

User Manual - Lesson 6 - The Chases
LT
&
39
•
EX-AM Mn: Information about the chase loaded in the selected masters:
M1 C801 > T2.0
78 STOP /\ P1
Where: M1 is the master name with the charged chase; C801 is the chase number; > is the direction
of the chase; T2.0 is the step time; 78 is the chase output level; STOP is the speed; /\ is the chase
mode and P1 is the current preset in scene (or c1 for the channel chase).
•
8
## ##
EX-AM: Information about the chase 8##.
•
800 EX-AM: Information about all stored chases.
Erasing a chases from the console memory:
•
801 DELETE.
Other functions for the chases:
•
M
odd
: Stars the chase. The first step appears in scene, after the step time, this step goes out and
the next step appears in scene... After the last step, the first step appears again. The M
odd
LED
is blinking. If the chase is active, when we press the M
odd
key, the chase is stopped and
deactivates, and its LED is lit.
•
# M
odd
. Stars the chase. The chase is executed # times, and after, it is deactivated
automatically.
•
M
even
. Chase execution in manual mode, "step to step". In this way the speed control has not
function. The user marks the step time with the M
even
key. Each time that we press M
even
key a
new step appears in scene. The M
even
LED is lit, the M
odd
LED stops if is blinking. When the
chase steps fade in scene, the speed control fader controls the speed of this fade. If this fader is
at 0%, HOLD, there are not steps in scene (except in "hard1" mode, _

).
•
# M
even
: Stars the step # to scene. The chase is in "step to step" mode.