LT-Light TRITTON-24, User Manual

Page: 13 / 78

User Manual - Lesson 3 - Layout & Basic
LT
&
7
3 - LAYOUT & BASIC FUNTIONS
LAYOUT: LOGIC PARTS
In the frontal panel of the console we can find:
MANUAL FIELD
The 24 potentiometers (36 for TRITTON-36 or 48 for TRITTON-48), localizer in the upper zone,
and marked like C1..C24 are the channels level potentiometers. All potentiometer has one Flash
key associated.
All Flash keys have a green LED. In this LED we can see the output level of its associated channel.
These keys are affected only by the general master position.
In the frontal panel, (upper left), we can find the C potentiometer, this potentiometer controls the
manual field output in scene, (C potentiometer doesn't affect the channel flash level), is the manual
field master.
Over this potentiometer we can find the SG.DB key. This key permits us to choose between two
manual field modes: Single (LED off) y Double (LED on).
MASTERS
There are 12 masters (24 for TRITTON-36 & 36 for TRITTON-48), marked like M1..M12. All
masters have associated a multifunction key.
The multifunction key, Mn, (M1..M12), can work like:
•
Master assignation key. It used for load or remove groups, memories or chases in a master.
•
Master Flash key: Modes normal and solo.
•
GO key: Start fades of the master assignation, (group or memory) or Start the chase (automatic
or step by step modes).
These keys have a red LED, this LED show us the associated master status.
GENERAL CONTROL
Located near the masters and under manual field, we can find this general control section. The
general control is composed by:
•
2x16 characters alphanumeric display, monitoring the menus, numerical data, fault and
information messages, and any other needed information...
•
Numerical keyboard.
•
Arrows & ENTER keys.