LT-Light TRITTON-24, User Manual

Page: 51 / 78

User Manual - Lesson 7 - Setup
LT
&
45
Here, we have access to the parameters:
SOLOon/SOLOoff
This parameter can appear in these two formats. This parameter permits that a Flash Solo (in the
masters) backs out the sequence or not:
SOLOon: Activate. The Flash Solo does not black out the sequence.
SOLOoff: Deactivate. The Flash Solo blacks out the sequence.
The parameter is active by default (on).
To change this parameter, select the SOLOon option, now we can choose the desired status for this
parameter:
ON OFF
Select the desired option and press ENTER.
Tºon/Tºoff
This parameter can appear in these two formats. This parameter permits count the delay time of the
sequence or not.
Tºon: Activate (by default). The delay time is active in the sequence execution.
Tºoff: Deactivate. The delay time is not active in the sequence execution. The user have to press
GO to start each new crossfade. (The delay times are not erased).
This option is very used to test the sequence rapidly. (Only testing the crossfade times).
To change this parameter, select the Tºon option, now we can choose the desired status for this
parameter:
ON OFF
Select the desired option and press ENTER.
RECfixed / RECfree
This parameter can appear in these two formats. This parameter permits that the stored preset will be
included in the sequence automatically or not:
RECfixed At the same time that you store one preset, this preset is inserted in the sequence
(in numerical order).
RECfree: The new stored presets are not inserted in the sequence.
We can change this parameter in any time.
When we are storing presets for our sequence this parameter have to be like FIXED, and when we
are storing presets for others things this parameter have to be like FREE.
By default, we have this parameter like RECfixed.
To change this parameter, select the command and, in the new display appears:
FIXED FREE