LT-Light TRITTON-24, User Manual

Page: 62 / 78

User Manual - Lesson 7 - Setup
56
&
LT
If the crossfade is not dipless, in this same example, when we press GO, the channel 1 beginning to
fade toward 0%, until the X2 output scopes this current level. In this moment this channel is
controlled by X2.
SCR - Scrollers (colour changers)
•
Select the option SCR (In the second pages of the Setup menu):
Display 2:
Set RST LNG CT
BEEP XF
n n
SCR
n n
->
•
Select the option SCR, with the cursors.
•
Press ENTER.
In the display:
n n
Scr
n n
EDIT DFT
PRIORIoff Scr0
From here, we can:
EDIT: Edit the scroller sheet.
DFT (DEFAULT): Whit this option we set up that all the channels are lighting channels. There are
not scrollers. In this case in the display (downright) we can see, Scr0.
PRIOIRoff / PRIORIon: To activate /deactivate the priority for scrollers, about its control mode. By
default this characteristic is PRIORoff.
To edit the scrollers sheet, select the option EDIT. In this submenu we can define that channel is a
scroller:
c1
n n
LIGHT
n n
c2 LIGHT
In the display, we have the scroller sheet, and from the second column we can set up the type of the
control channel (LIGHT or SCROLLER). To change the current selection, press the INSERT key.
Each time that we press INSERT this option switch between light and scroller. We can move with
the arrow keys to set up the desired channels. Press ENTER to store and exit of this menu.
About the scroller channel operation:
1. The GM or the BO key does not control the scroller channels.
2. The "preheat" function does not work with the scroller channels.
3. All the scroller channels work in LTP mode (Last Take Precedence), the last command has
priority. In the light channels the maximum level has priority (HTP mode - Highest Take
Precedence).
4. A stored scroller in one preset scopes its maximum level in the moment that the preset is
activated (in the sequence, master, and chase…).