LT-Light TRITTON-24, User Manual

Page: 56 / 78

User Manual - Lesson 7 - Setup
50
&
LT
•
Set the sequencer (or the other console) in reception mode for the System Exclusive, Sysex.
(Each sequencer has its particular way to do this).
•
Press: ##
n n
TXD
n n
ENTER
Where ## is a number of a show recorded in the TRITTON memory. During the transmission in the
display you can see: Sending...
When the show data are send, TRITTON returns to the previous menu. The sequencer (or other LT
console) permits us to store the received data.
To import a show in the TRITTON memory, you must:
•
Connect the MIDI cable in reception mode (see the previous table).
•
Press: ##
n n
RXD
n n
ENTER
Where ## is a number of a new show that it will be stored in the TRITTON memory. During the
transmission in the display you can see: Receiving...
•
Send from the sequencer (or other console) the Sysex data. (Each sequencer has its particular
way to do this).
NOTE: The transmission from the sequencer must begin after the set up TRITTON in reception
mode, but, before 4 seconds, in other way, the reception mode (in TRITTON) is deactivated in
automatically.
When the transmission is finished, TRITTON returns to the previous menu. In the memory of
TRITTON the show ## is stored.
Remember: Only a stored show in the TRITTON memory can be sent. All Sysex data received are
stored in the TRITTON memory. The System Exclusive doesn't work with the active show.
All Sysex data are available for software MIDI sequencer of PC or Mac, for hardware MIDI
sequencers and for others LT consoles, in concrete the consoles TRITTON and TITAN.
The MIDI port of TRITTON is automatically configured to execute the Sysex commands (RXD or
TXD).
MID - MIDI port configuration
Select the option MID (In Setup menu):
Display 1:
Set PCH SEQ GM
PRH MEM
n n
MID
n n
->
•
Select the option MIDI, with the cursors.
•
Press ENTER.
In the display: