LT-Light TRITTON-24, User Manual

Page: 75 / 78

User Manual - Lesson 12 - Special Functions/Time
LT
&
69
12 - SPECIAL FUNCTIONS - TIME
‘CAPTURING’ DELAY TIMES FOR THE SEQUENCE
We can ‘capture’ the delay times, for the sequence, manually. In other words, we can press the GO
key, reproducing the sequence, as times as it is necessary, and TRITTON ‘teaches’ the time between
pressings (delay time). This delay time, Tauto, is inserted in X1 at the end of its crossfade.
If we have programmed delay times, deactivate this times (SETUP SEQ Tºoff).
Recording delay times manually:
•
Press and hold down TIME and press GO. The crossfade begins, when the crossfade finish
begins the delay time, to mark its finish and the beginning of the next crossfade:
•
Press and hold down TIME and press GO. In this moment the total delay time is inserted in the
step in X1 and the next crossfade begins…
•
Press and hold down TIME and press PAUSE, to finish this process.
Notes:
If we have recorded fade times, these times are discounted of the delay times.
If we have not recorded fade times, and we want insert them after maintaining the time between
crossfades:
1. From the Main menu, select the option SEQ to edit the sequence.
2. Enter the desired fade times pressing and hold down TIME (TIME + ###), in this way the
inserted fade time is discounted of Tauto. The time between crossfades is the same.
Note:
In the capture processing: If the delay time is smaller than the stored fade time, the console emits a
warning ‘beep’ and the delay time is not recorded, but the storing process is not deactivate.