LT-Light TRITTON-24, User Manual

Page: 44 / 78

User Manual - Lesson 6 - The Chases
38
&
LT
Go to the end of the chase, (the first empty step).
Prepare the desired scene.
Press INSERT. In this moment the console output is stored like a group in the selected
chase step, and the system is ready in the next step.
General notes:
To load one group you can use LOAD or INSERT (in the last step).
During of edition of the chase the LOAD key doesn’t work out this chase edition.
In the groups chases, because of the chases haven’t reference number, in the chase steps appears the
step number.
THE CHASES IN THE MASTERS
The chase uses 2 consecutive masters for its control:
The odd master is the level control master for the chase output. (0 - 100%)
The even master is the speed control master for the chase. (CUT: 100%, STORED TIME: 50% and
HOLD: 0%).
The Mn key associated to the odd master, M
odd,
starts the stopped chase or stops the active chase,
(GO-chase).
The Mn key associated to the even master, M
even
is to execute the chase step to step, each time that
you press its M
even
the chase advances one step.
The flash master function does not work in the Mn keys associated to a chase.
Loading a chase in masters.
•
8## LOAD Mn. (The M
impar
LED is lit)
All Chases are loaded with its level control locked at 100% and its speed control locked at 100%,
in this way it is not necessary displace the masters to reproduce the chase.
Removing a chase in masters. There are three options:
•
800 LOAD Mn
•
0 LOAD Mn or
•
DELETE Mn
Information about the chases: