LT-Light TRITTON-24 User Manual Download Page 12

Page: 12 / 78

User Manual - Lesson 2 - Technical Characteristics

INSTALLATION

TRITTON is distributed ready to work:

•

Unpack the console with care.

•

Place the console in a plane surface.

•

Connect the power cable to the IEC base, in the rear of TRITTON. Always use power cable
with earth, normalised.

•

Connect the DMX output cable to the connector marked like DMX OUT, Always use data
cable for the RS485 standard: twisted pares screened, of low capacitance and 120 ohms
impedance.

•

Switch on the console. Switch in position I.

TRITTON is ready to work!

MAINTENANCE

TRITTON doesn't need periodical maintenance.

Cleaning: Clean the external surfaces with a cloth wetted in water.

TECHNICAL SERVICE

GERMANY: Geo-Technic

Fax: 0049 (0) 6188 - 90 11 41

Tel: 0049 (0) 6188 - 90 11 40

Actualization of software: www.dimmer.de

Summary of Contents for TRITTON-24















































































Search results

Summary of Contents for TRITTON-24

Reviews:

Related manuals for TRITTON-24

Brands by name

Popular brands

LT-Light TRITTON-24, User Manual

Search results

Summary of Contents for TRITTON-24

Reviews:

Related manuals for TRITTON-24

Brands by name

Popular brands