LS ELECTRIC eXP2 Series, User Manual, Page: 72 / 129

Chapter 8 XGT Panel S/W Update
8-1
Chapter 8 XGT Panel S/W Update
8.1 General Introduction
It describes the function for updating the XGT Panel software.
Basically you can optimize XGT Panel when you download the project file in XP-Builder. Please use this function
only in case of updating XGT Panel specially.
New function is added to XGT software, you need to update a version of XGT Panel.
Please refer to the following.
[Method]
Select [Upgrade -
> Update XGT Panel] on the XGT Panel’s main screen. Then XGT Panel becomes update
mode. In order to return to the main screen, touch a “MENU” button or touch the screen for 3 seconds
After downloading XGT Panel software from LS ELECTRIC website, make a temporary folder and save it.
Designate the folder where the software will be saved in the XP-
Builder’s [XGT Panel Update] windows and
update XGT Panel by [Send] menu. For more detailed information about XP-Builder, please refer to the XP-
Builder user manual.
Remark
Do not remove communication cable or turn off the device during updating.
It may cause the abnormal operation.