LS ELECTRIC eXP2 Series, User Manual, Page: 39 / 129

Chapter 4 System Configuration
4-8
Menu Explanation
Hide mouse cursor Mouse cursor does not appear after scrolling.
Buzzer On / Off You can set whether buzzer is used or not.
Buzzer test You can test the buzzer.
Low Memory Mode
XGT Panel starts monitoring the images used on the screen to speed up the screen
operation.
It will be loaded into memory before use. By the way,
If a positive image is used, due to memory space constraints, all
The image will not load. In this case, if the screen is not yet loaded
Images are loaded, and there is not enough space, so unused images are retrieved from
memory
The operation to delete may be repeated, and the screen switching operation may be
slowed down. In this situation
Low Memory Mode "is recommended. In Low Memory Mode, you do not load the image
before monitoring, but use only the original source of the image used in the project, which
results in less memory usage and less load to load and delete images into memory.
Async mode
Ensures the order of operation when entering values by bit switch, word switch, multi-
switch, etc. when [Async mode] is deselected. In other words, when 1, 2, 3 actions are
performed by multiple switches or overlapped switches, 2 is performed when 1 action is
completed, and 3 is performed only when 2 is completed. Therefore, if there is no
response from the target controller in Operation 1, the actions 2 and 3 are also
delayed
even if the controller is different.
When [Async mode] is selected, the value is entered by bit switch, word switch, multi-
switch, etc. without ensuring order. In other words, when 1, 2, 3 actions are performed by
multiple switches or overlaid switches, each action can be completed in the order of 2, 1
and 3 depending on the network situation or controller response speed. Although the
order is not followed, it has the advantage of operating quickly for the rest of the controllers
even if some of them do not respond.
Show progress
on the bottom
When you start monitoring by selecting [Start] menu on the XGT Panel main screen,
It buffers the used image and shows the progress of the operation. (fast
Do not show progress if you make a start setting). At this time,
If you check the [Show Lower] check box, this progress will be simplified and displayed at
the bottom of the screen.
Is displayed. This option can be applied when using the default screen image.
Clear SRAM memory
And data files
Delete all files you've downloaded on your device. However, connecting to the device
If a password is set, you must enter the password before you can delete it. The password
is the device connection password that you enter when downloading a project, This can
be set in XP-Builder on the Device Information View tab of the Communication dialog box.
The files to be deleted include user project data, web server, VNC startup module, option
card Driver, RAPIEnet communication setting data, XP-Manager setting data etc. from
user PC All downloaded data is included. Set using the configuration menu of the
machine. The contents are kept uninitialized. If the menu language is not English,
A device reboot is required to delete files.