LS ELECTRIC eXP2 Series, User Manual, Page: 10 / 129

Chapter 1 General Introduction
1-1
Chapter 1 General Introduction
1.1 How to use the Instruction Manual
This instruction manual provides information such as specification, how to use, etc., of the product needed to
operate eXP2 series of XGT Panel.
The user manual’s configuration is as follows.
Sequence Category Contents
Chapter1 General Introduction
It describes this manual’s configuration, product’s feature and
term.
Chapter2 System Configuration It describes feature and system configuration of each XGT Panel.
Chapter3 Standard Specification
It describes XGT Panel’s general and function specification.
Chapter4 System Configuration
It describes XGT Panel’s system configuration.
Chapter5 Diagnostics
It describes XGT Panel’s self-diagnosis.
Chapter6
Viewing information of
PLC Connection Status
It describes the way on connection status information of PLC
which is connected with XGT Panel.
Chapter7
Transmission of
Project from USB
Storage Device
It describes the way to execute the project by using USB storage
device.
Chapter8 XGT Panel S/W Update It describes the way to update engine at XGT Panel.
Chapter9
Backup files by using
Storage Devices
It describes the way to backup recipe, logging and etc. files by
using storage devices.
Chapter10 Installation and Wiring
It describes an installation, wiring and caution for reliability of PLC
system.
Chapter11 Maintenance
It describes inspection category and method for long normal
operation of PLC system.
Chapter12 EMC Standard It describes system configuration for EMC standard.
Appendix 1 Troubleshooting It describes a variety of error contents and measure.
Appendix 2 Dimension It describes the dimension of XGT Panel.
Appendix 3
Warranty and
Environment Policy
-
Remark
This manual doesn’t describe connection with XP-Builder and PLC. For their own function, Please refer to the
related manuals.